2021-12-30
Flake Ice Machine is commonly used in the seafood producing process, from storage facilities to the seafood department of a local grocery, the flake Ice Machine is playing a vital role to keep the food fresh. In the instrument industry, precision components factory provides parts processing, need to consider the corresponding technology and efficiency, as well as the detailed process. And during it’s working, there might occur some issues like machine noise. While how to solve it potently, Let’s take a look at the following guide.
Flake Ice Machine’s Vital Role in Our Life
The moment a fish is caught and out of the water, the process of decay begins. The spoiling process is largely dependent on temperature, and according to scientific research, no other factor has a greater impact on seafood freshness than temperature. Higher temperatures speed up this process, while cooler temperatures significantly slow it down. To keep the fish fresh, it needs to be kept at temperatures around 0°C. Even a slight increase in temperature to 4°C will double the rate at which your seafood spoils. So the colder the ice, and the more uniform it is, the longer your fish will survive.
Advances in modern refrigeration technology have made light-sheet ice makers much lighter and smaller and can be mounted on any fishing boat. This gives fishermen more control over where and when they catch their fish. The length of their journey is no longer limited by the amount of ice the port can hold or how long the ice can hold their catch. With a quality flake ice machine, no matter when you dock, the fish you catch is as fresh as the day you caught it.
While for this important role the flake ice machine takes in our life, there would be some noise issues which bothering us a bit, so there are some ways to solve it I list for you.
Machine’s noise problem and way to solve it
There are many reasons for the abnormal noise inside the evaporator of the flake ice machine. The evaporator is an important ice-making component of the flake ice machine. When abnormal noise occurs, it may affect the output of the equipment and the effect of the ice flakes. The following reasons may cause the flake ice machine noise:
Skate offset of flake ice machine
We all know that the distance between the ice blade of the flake ice machine and the ice bucket of the evaporator is about 15 filaments (0.15 mm). The gap is very close. The ice blades are slightly misaligned, resulting in uneven ice cutting or jamming of the ice buckets. Abnormal internal noise.
Solution: Contact the flake ice machine manufacturer for after-sales service to adjust the ice skates. (Professionals must be repaired)
The saltwater concentration of the flake ice machine is too low or too high
The flake ice machine needs to add salt during the working process. If the proportion of saltwater is not consistent, the ice bucket of the flake ice machine will have a higher freezing hardness. At this time, the ice skates are not easy to cut off the ice on the inner wall of the ice bucket, or the cut is not clean. , There will be abnormal noise.
Solution: Please follow the instructions to add salt, the method of adding salt to the flake ice machine.
The brine pipeline of the flake ice machine is blocked, or there is air, or the brine pump is damaged.
Solution: Check the ice cleaning pipeline to ensure that the saltwater supply is normal. There is air in the saltwater pipe in the flake ice machine. Remove the air in the pipe to ensure that the water tank supplies the saltwater normally.
The brine pump of the flake ice machine is damaged, the solution: replace the brine pump
Confronting Damages of Flake Ice Machine
The evaporator of the flake ice machine is damaged, you need to contact the ice machine manufacturer to replace the ice bucket.
